Detect Leakage Sooner To Avoid More Serious Problem

Leakage is one of the problems that is often encountered in water pipes. The causes can vary, for example, connections or errors in selecting and applying pipe glue. The best thing you could do to prevent serious damage is to call a plumber to detect leakage. The damage caused by a leaking pipe could be a serious problem from lack of clean water supply in the house, water waste until house foundation damage. That is why detecting a leakage is better to be done sooner.

But you could also detect the leakage by turning off all household appliances that use water first. Then turn off the pipes first so that the water stops flowing. Close the water valve that is connected to the pipeline. Identify the source of the leak by looking at the seepage of water that appears to Look closely at the place where the emergence of water seepage. Mark the water seepage areas that appear. Dismantle the wall using a hammer or drill to reach the leaking part. If you have found a seepage area, to repair the pipe start to dismantle the wall or floor where the leak is located using adequate equipment, such as a hammer and drill. You must be careful, do not let the demolition aggravate the condition to overcome the leak in the pipe. When installing a pipe and you have difficulty, you should ask for help from experts. Also, note how the condition of your pipe.

Note the condition of whether the pipe needs to be replaced or patched enough. If there are only a few leakage holes then you can patch the leaky pipe connection. But if the leakage hole is large enough, then you have to cut the leaky pipe and then connect it with a new pipe connection. However, if you do not have the knowledge, skills, and experience in repairing pipes then it is better to call a professional help from a licensed plumber.

Leave a Reply

Your email address will not be published. Required fields are marked *